0

 
 

..[Home]-[Terms]-[Contact]-[Email]..

 

 

 

Metal Working Equipment

&

CNC BELOW

 

"Last Updated On-04/23/10"

 

cnc-3-550-9133 mw-15-003125-1 mw-15-003067-1 mw-15-003189-1
1997 SERVO 4000 CNC Bed Mill
SERVCO CONSOLE
Condition: Equipment was not in use at time of recovery.
Crystal Lake Grinder
Crystal Lake 10x18 OD Grinder
 
Eaton 30HP Air Compressor w/Air Dryer
Eaton 30 HP, 3-Phase,
240V Rotary Screw Air Compressor
High Temperature Refrigerated Air Dryer
Model 134
240 Gallon Vertical Tank with Auto Drain
Plasma Cutting System
PlasmaCam DHC2 5'x10' Plasma Cutting Table with Control,
(1) Thermal Dynamics Cutmaster 81 Torch
Software Not Included

CONDITION

LOCATED IN NC

FAIR CONDITION

LOCATED IN AZ

FAIR CONDITION

LOCATED IN AZ

FAIR CONDITION

LOCATED IN OR

MAKE OFFER $2,000 $5,000 $6,000

 

MW-15-002128-1 MW-15-002608-1 MW-15-001720-2 MW-15-003053-1
2007 Ganesh CNC Miniturn with Fanuc OiT Control
2007 Ganesh CNC Miniturn with Fanuc OiT Control. Model: 05-321
2009 NiTec CLS-408 (Sheet Metal Layout Machine)
2009 NiTec CLS-408, Layout Machine for Sheet Metal.
Engage Machinery's Scorpion Metal Shear
Engage Machinery's Scorpion Metal Shear, Model: R12016
Fadal VMC3016 with 32 MP Control
Fadal VMC3016 with 32 MP Control. Model: 904-1 230V/3Ph/60Cy.

FAIR CONDITION

LOCATED IN CA

FAIR CONDITION

LOCATED IN NC

FAIR CONDITION

LOCATED IN NC

FAIR CONDITION

LOCATED IN CA

$21,600 $5,000 $12,000 $12,000

 

MW-15-001006-1 MW-15-001006-3 MW-15-001006-7 MW-15-001108-1
Est. 1988 Chicago 25-Ton Speedibender SBA-104
Est. 1988 Chicago 25-Ton Speedibender. Model SBA-104. 6,800lbs.
2005 Roper Whitney PH-52 Hydraulic Shear
2005 Roper Whitney Pexto PH-52 Hydraulic Shear.
2006 Nitec CLS-410L CNC 4'x10' Layout Table
2006 Nitec CLS-410L CNC 4'x10' Layout Table.
Okuma Model LB15-II CNC Turning Center
Okuma Model LB15-II CNC Turning Center with Sub Spindle. 220v/3ph/60cy

FAIR CONDITION

LOCATED IN AZ

FAIR CONDITION

LOCATED IN AZ

FAIR CONDITION

LOCATED IN AZ

FAIR CONDITION

LOCATED IN CA

$4,000 $3,000 $4,500 $14,900

 

MW-15-912668-1 MW-15-909699-1 MW-15-909690-1 MW-15-808061-1
10 x 24 Jack Mill Grinding Machine
10 x 24 Jack Mill Universal Precision Cylindrical Grinding Machine, MFD: 1986, Model: JMC-600 AGC
Herbert-Devlieg Spiramatic Jig Mill Model 3H-48
Herbert-Devlieg Spiramatic Jig Mill, Model 3H-48, 3 Phase, 400/440V, Speed Range 30-200RPM, Acu-Rite
Digital Readout, Cat. No 387.
2008 Bailegh MH-19 Multi Function Power Hammer
2008 Baleigh MH-19 Multi Function Power Hammer With: Variable Speed, 19 Throat, Quick Change Tooling, Foot Pedal
Control. Leaf Spring Hit, Ridgid Hit And English Wheel. 220 Volt 1 Phase.
1991 Tape Cut -W2 EDM Wire Cutting Machine
1991 Matra Fanuc Tape Cut -W2 EDM Wire Cutting Machine

FAIR CONDITION

LOCATED IN NC

FAIR CONDITION

LOCATED IN OH

FAIR CONDITION

LOCATED IN MO

FAIR CONDITION

LOCATED IN CA

$3,750 $2,500 $13,500 $4,000

 

MW-15-808061-3 MW-15-808061-4    
Niagara SA2-60-42-30 60 Ton Press
Niagara SA2-60-42-30 Press 60 Ton W/Controller , 30 Bed Size, 3 stroke, SPM 50-250, S.H 16
1988 Mazak V-12 CNC Machine Center
1988 Mazak V-12 CNC machine Center Fanuc Logic 20Hp 2920/3450 RPM, 20FB, 48LR, Automatic Tool Changer
   

FAIR CONDITION

LOCATED IN CA

FAIR CONDITION

LOCATED IN CA

CONDITION

LOCATED IN

CONDITION

LOCATED IN

$4,000 $5,000    

 

 

CNC Machine Shop Tools Used

"Last Updated On-04/23/10"

 

 

ALSO CHECK METAL WORKING ABOVE FOR MORE CNC EQUIPMENT

 

   

 

Copyright©2009 Equipment Exchange Inc. All Rights Reserved
 Mailing P.O. Box 1207 Lutz Florida 33548-1207
Phone 813-949-7397